11
SKOPE TME/SKT ActiveCore
Electronic Controller
Service Manual
3 Electronic Controller
Electronic Controller Operations
Introduction The fridge is fitted with a CAREL S4 or a CAREL S4 Evo electronic controller, which is visible
on the front panel and is housed inside the electronic controller box assembly at the front of
the refrigeration unit.
The electronic controller controls and displays the fridge temperature, signals temperature
alarms, and switches the fridge between Normal and Energy Saving modes depending on
usage. During normal operation, when the cabinet door is being opened and closed, the fridge
is in Normal mode with the lights on. If the door is not opened for a period of time, the fridge
will automatically enter Energy Saving mode and the lights will switch off. See page 12 for
more information on operating modes.
To ensure efficient operation, the electronic controller automatically forces a defrost cycle
when required.
The electronic controller is pre-programmed. SKOPE does not recommend that settings be
changed unless it is absolutely necessary.
Faceplate Because the electronic controller plays such an important role, it’s helpful to know the parts of
the faceplate you may use.
1 2
3
4
5
6 8
7
To Next Page
Loading...
