SMA sunny home manager - Communication Monitoring Setup

Procedure:
1. Select Configuration > Report configuration in the page and menu selection.
2. Select the desired report in the drop-down list Report configuration.
3. In the field Report Date in the area Regenerate Report Manually, enter the date for which
you wish to create a report. Tip: click the calendar icon and select a date in the calendar.
4. Select [Generate].
☑ A message that the report has been successfully sent is displayed.
11.4 Setting Communication Monitoring
In case the SunnyHomeManager does not communicate with SunnyPortal, you can set the time
which should elapse before SunnyPortal reports an error and notifies you by e-mail.
The time which should elapse before the error is displayed by SunnyPortal and you are notified by
e‑mail is defined in the following settings:
• Alerts
• Data Request Interval (see Section8.7, page69)
Requirement:
☐ You must have the user role Installer or PV System Administrator (see Section13.1,
page120).
Procedure:
1. Select PV System Monitoring in the page and menu selection.
2. In the area Communication Monitoring, select [Settings].
☑ The page Configuration communication monitoring opens.
3. Click the slider and, holding the left mouse button pressed, set how quickly SunnyPortal is to
report an error and notify you by e‑mail:
Alerts Data request interval Time
Off Automatic Communication monitoring
is deactivated.
Hourly
Daily
Bounteous Automatic 3:15 h
Hourly 4:00 h
Daily 27:00 h
Tolerant Automatic 1:15 h
Hourly 2:00 h
Daily 25:00 h
11 System Monitoring
SMA Solar Technology AG
User Manual 105HoMan_Portal-BA-en-20