SMA sunny home manager - Controlling Loads via Radio-Controlled Sockets

Deleting a Time Period
You cannot delete all the time periods for a load. At least one time period must always be
configured for each load. If no radio-controlled socket is assigned to the load, however, the time
period has no effect on the operation of the load.
Procedure:
1. Select Configuration > Load Overview and Planning in the page and menu selection.
2. In the line of the desired load, in the column Configuration, select .
3. In the tab Name of Load, select the button [Edit].
4. Select [Configure time period].
5. Select for the desired time period and confirm the security prompt.
6. Select [Accept].
7. Select [Save].
9.4 Controlling Loads via the Radio-Controlled Socket
9.4.1 Controlling Program-Controlled Loads
This section describes how to control program-controlled loads via radio-controlled sockets, using a
washing machine as an example load.
Procedure:
1. Ensure that the load can be controlled by the radio-controlled socket:
• Ask the load manufacturer whether the load is suitable for control via a radio-controlled
socket or timer.
2. Connect the washing machine to the radio-controlled socket.
3. Configure the washing machine as a load (see Section9.3, page79).
4. Configure the radio-controlled socket to which the washing machine is connected (see
Section9.2, page75) and assign it to the load Washing machine (see Section9.2.4,
page76).
5. Set the operating mode of the radio-controlled socket to On (see Section9.2.6.1, page77).
Voltage supply to the washing machine is now enabled.
6. Load the washing machine with laundry.
7. Set the desired program on the washing machine.
9 Load Control
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-2090