SMA sunny home manager - Inverter Comparison Configuration

Alerts Data request interval Time
Sharp Automatic 00:30 h
Hourly 1:15 h
Daily 24:15 h
4. Enter the e-mail address(es) of the recipient(s) in the text field Recipient. If you enter several e-
mail addresses, separate these by commas.
5. Select [Save].
11.5 Setting the Inverter Comparison
The inverter comparison enables SunnyPortal to recognize possible yield losses. If the specific yield
of an inverter differs significantly from the mean yield of all the inverters, SunnyPortal can notify
you by e-mail.
Requirements:
☐ The PV system must contain at least two inverters.
☐ You must have the user role Installer or PV System Administrator (see Section13.1,
page120).
Procedure:
1. Select PV System Monitoring in the page and menu selection.
2. In the area Inverter comparison, select [Settings].
☑ The page Configuration of inverter comparison opens.
3. Enter the e-mail address of the recipient in the text field Recipient. If you enter several e-mail
addresses, separate these by commas.
4.
PV array power
The PV array power is preset in the text field Generator capacity [kWp]. SunnyPortal
calculates the PV array power based on the nominal power of each inverter. You can
also enter the PV array power manually or have SunnyPortal calculate it by entering
information on the strings (see Section8.10, page71).
5. In the text field Tolerance, enter the permissible tolerance for the inverter's specific yield. This
simultaneously sets the deviation of the inverter specific yield from which e-mail notification by
SunnyPortal will be triggered.
6. To select an inverter for the inverter comparison, activate the checkbox Monitoring in the line
of the inverter.
7. Select [Save].
11 System Monitoring
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-20106