SMA sunny home manager - Energy and Power

Tab Content
Year • In the diagram: Energy drawn by each load in the selected
year in months
• In the table:
Annual consumption: Energy drawn by the load in the
selected year
PV energy percentage: Percentage of the annual
consumption covered by PV energy
Battery discharging percentage: Percentage of the annual
consumption covered by battery discharging
Configuration: With the Configuration button [ ] you can
configure the properties of the load.
Total • In the diagram: Energy drawn by each load in the individual
years
• In the table:
Total consumption: Total energy drawn by the load so far
PV energy percentage: Percentage of the total consumption
drawn from PV energy
Battery discharging percentage: Percentage of the total
consumption drawn from battery discharging
Purchased electricity percentage: Percentage of the total
consumption drawn from the utility grid
Configuration: With the Configuration button [ ] you can
configure the properties of the load.
6.2.5 Energy and Power
Requirements for displaying the page:
☐ No purchased electricity meter and no feed-in meter must be connected to the
SunnyHomeManager.
The SunnyHomeManager receives the PV generation data via the connected SMA inverters or via
an optionally connected PV production meter. The diagrams on the individual tabs show the energy
yields only.
This page consists of the following tabs:
Tab Content
Day • PV power curve over the course of the day
Month • Total yield on the days of a month
• Average expected yield*
6 Page and Menu Selection
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-2050