EasyManua.ls Logo

SMA sunny home manager - System Management Operations; Adding or Replacing Devices

SMA sunny home manager
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 System Management
10.1 Adding or Replacing Devices
You can add devices to your SunnyHomeManager system or replace devices.
You have to capture the new device with the SunnyHomeManager. The configuration wizard in
SunnyPortal assists you in capturing, adding and replacing devices.
If you need to replace the SunnyHomeManager, you must use the PV System Setup Assistant (see
Section10.3, page96).
General requirements:
You must have the user role Installer or PV System Administrator (see Section13.1,
page120).
Requirement for SMA devices:
For new SMA BLUETOOTH devices:
The NetID of the PV system must be set on the new SMA BLUETOOTH device.
The BLUETOOTH LED on the new inverter or on the new BLUETOOTH Piggy-Back or
BLUETOOTH Piggy-BackOff-Grid in the new inverter must be glowing blue.
For the new SMA device, the default password 1111 for the user group Installer or the
system password of the existing system must be set (see Section14.3, page124).
The new device must be in operation.
The data request interval must be set to Automatic (see Section8.7, page69).
Device replacement: The old device must NOT be deleted, but deactivated
If you delete the device that you wish to replace from SunnyPortal, all the device data is
irretrievably deleted.
To retain the data of the old device in SunnyPortal, do not delete the old device, but
deactivate it (see Section10.2, page96).
Add the new device as an additional device to the SunnyHomeManager system
(system extension).
Smart appliances cannot be replaced
Smart appliances which communicate via a data exchange protocol with the
SunnyHomeManager cannot be replaced in SunnyPortal.
To retain the data of the old load in SunnyPortal, do not delete the old load, but
deactivate it (see Section10.2, page96).
Add the new load as an additional device to the SunnyHomeManager system (system
extension).
Procedure:
1. Go to www.SunnyPortal.com.
2. Log into SunnyPortal (see Section4.1, page28).
10 System Management
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-2094

Table of Contents

Other manuals for SMA sunny home manager

Related product manuals