SMA sunny home manager - Creating a Report for a Specific Date

Procedure:
1. Select Configuration > Report configuration in the page and menu selection.
2. In the drop-down list Report configuration, select an Event report.
3. Select [Edit].
4. Configure the report:
Range Explanation
Activate report
• Activate the checkbox Active.
Recipient • Enter the e-mail address(es) of the recipient(s) in
the text field E-mail address(es). If you enter
several e-mail addresses, separate these by
commas.
Interval • To receive an e-mail with event report every hour,
activate the option Hourly.
• To receive one e-mail with event report per day,
activate the option Daily and, in the drop-down
list, select the time you would like to receive the e-
mail.
Content You can select up to four SunnyPortal and
SunnyHomeManager system event types: Informa-
tion, Warnings, Failures, Errors.
• Activate the content that is to be displayed in the
e-mail.
• In the area Send Report as, select the format in
which SunnyPortal is to send the report.
• In the area Limit messages in one report, use
the drop-down list to select the maximum number
of messages to be displayed in the e-mail.
• If you wish to send reports even if there are no
new events, activate Send empty reports if no
new events are available.
5. To send a test report to the stated e-mail address, select [Send test report].
6. Select [Save].
11.3.3 Creating a Report for a Specific Date
You can create a report for a specific date in the past.
Requirement:
☐ You must have the user role Installer or PV System Administrator (see Section13.1,
page120).
11 System Monitoring
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-20104