SMA sunny home manager - Page 5

8.3 Calling Up the Device Parameters ................................................... 67
8.4 Updating Parameters......................................................................... 67
8.5 Reading Off the Software Package Version.................................... 68
8.6 Configuring the Energy Meter .......................................................... 68
8.7 Setting the Data Request Interval...................................................... 69
8.8 Activating/Deactivating Automatic Software Updates................... 70
8.9 Entering Line Conductors................................................................... 71
8.10 Entering the PV Array Power............................................................. 71
8.11 Changing the Device Name............................................................. 72
8.12 Changing a Device Description........................................................ 73
9 Load Control ............................................................................. 74
9.1 Information on Load Control............................................................. 74
9.2 Configuring Radio-Controlled Sockets ............................................. 75
9.2.1 Safety when Configuring Radio-controlled Sockets .................... 75
9.2.2 Requirements when Configuring Radio-Controlled Sockets........ 75
9.2.3 Activating/Deactivating Data Collection..................................... 76
9.2.4 Selecting the Load ......................................................................... 76
9.2.5 Entering the Device Name............................................................ 76
9.2.6 Setting the Operating Mode of the Radio-Controlled Socket .... 77
9.2.6.1 Setting the Operating Mode of the SMA Radio-Controlled
Socket...................................................................................... 77
9.2.6.2 Setting the Operating Mode of the Plugwise Radio-
Controlled Socket ................................................................... 78
9.3 Configuring Loads ............................................................................. 79
9.3.1 Calling Up the Properties of a Load............................................. 79
9.3.2 Changing the Color Selection for Loads...................................... 80
9.3.3 Selecting the Load Icon................................................................. 80
9.3.4 Selecting the Load Type................................................................ 80
9.3.5 Selecting Program Controllability................................................. 81
9.3.6 Entering the Load Name ............................................................... 82
9.3.7 Entering the Power Consumption.................................................. 82
9.3.8 Entering the Maximum Program Operating Time........................ 82
9.3.9 Entering the Minimum Switch-On Time......................................... 83
9.3.10 Entering the Minimum Switch-Off Time......................................... 83
9.3.11 Assigning Radio-Controlled Sockets............................................. 84
Table of Contents
SMA Solar Technology AG
User Manual 5HoMan_Portal-BA-en-20