SMC Networks EX600-SEN3 - Page 78

-77-
No.EX※※-OMS0027
Web Server
EX600 Web server functional overview
The Web server function is provided by the EX600-SEN3/4.
The functions available vary depending on the mode.
Function Admin mode Monitor only mode
I/O Monitor Available Available
Diagnostic status monitor Available Available
Parameter setting Available Not available
Force I/O setting Available Not available
Connecting to a EX600-SEN3 (Ex. Windows 8)
(1) Open a web browser on the PC.
(2) Type the IP address of EX600-SEN3. (Ex. http://192.168.0.3.)
(3) The EX600 webpage should load after several seconds.
Note
This software operates correctly using Internet Explorer 6 to 11. If the functions do not operate
correctly with Internet Explorer 10 or later versions, then use Internet Explorer in compatibility
mode.
Default setting
Password: admin
When [Login] is selected after inputting
Password, the screen is switched to
[Admin mode].
When [Monitor only] is selected, the screen
is switched to [Monitor only mode].
No Password is required.
Note
Connect one SI unit to one PC.