Snom D335 - Appendix 2 - Status Messages

114
D335 User Manual Appendix 2
Appendix 2 - Status Messages
Whenever there is a current message concerning the status of the phone, the function key will be
available. Press the function key or, if it not available, > 6 Information > 1 Status Info) to open the
"Status info" screen. Additionally, some status messages will also be displayed in the status bar; if there is
more than one current message, the one with the highest priority will be shown. The messages in descending
order of priority:
Status message
Denition
SW 

Reboot required 
Reboot required, for example to have settings changes take

SIP disabled 
The phone cannot make calls due to license problems
Error 
An error occurred
Low memory 
Disk space full
Remote directory is too big 
The remote directory is too big to be imported
Not Registered: <account> 

Waiting for <name/number> to be
available ²
Waiting for call completion to busy or currently unavailable
number
<account> is now available ²
The dialed number is not busy anymore or is now available
Forward when Busy: <name/number>
Call forwarding is on. When your phone is busy, incoming
calls will be forwarded to the phone number indicated
Forward after Timeout: <name/number>
Call forwarding is on. When an incoming call is not picked up
within the set number of seconds, the call will be forwarded
to the phone number indicated
Forward all: <name/number> ²
Forwarding of all incoming calls is on. All incoming calls will
be forwarded to the phone number indicated.
Contacting NTP server
Network Time Protocol (NTP) is a protocol for synchronizing
clocks over data network. If the connection is interrupted,
the phone will not be able to display the correct time.
NTP server unreachable 
HTTP Password not set 
No HTTP password has been set
Admin Password not set 
No Admin password has been set

Only numbers designated as emergency numbers can be
dialled

Do not Disturb mode is activated
You have messages
There are spoken messages on the mailbox
You have new messages
New (messages on the mailbox)
Old messages
Old (messages on the mailbox)
Missed: <number>
The number of calls you missed since the last time you

indication
 The function key symbol will blink
