Snom D335 - LED Indicators; Call Indicator; Smartkey Leds; Page Key LED

20
D335 User Manual Getting to Know Your Phone
LED indicators
Call indicator
The bright-red LED situated at the top of the display indicates incoming, ongoing, held, and missed
calls. It will be:
• Blinking rapidly when a call is coming in
• Glowing steadily when dialing, when in a call, and when you have missed a call. To turn the LED
 on the navigation key to open the Missed calls menu

• Blinking slowly when you have put a call on hold
SmartKey LEDs
Depending on the function mapped onto the key, the red or green LEDs on the key will be activated
when the key event occurs. The factory setting is red LED and "line". The LEDs of a line key will:
• blink rapidly when a call is ringing on the line;
• glow steadily when there is an ongoing call on the line;
• blink slowly when a call is on hold on the line;
• 
When other functions are mapped onto the keys, the LEDs may glow or blink. For example: When the
"extension" function has been mapped onto a key and monitoring of extensions is enabled on both
phones, the LED will
• blink rapidly when a call is ringing on the extension;
• glow steadily when the extension is busy;
• 
Page key LED
The LED glows red. The function is programmable.
MWI key LED
The LED glows red when there is a new message on the mailbox.