67
D335 User Manual Using the Phone
interface for these settings, see "Call forwarding" on page 95.
Note
done on the phone, it applies to the identity selected as outgoing identity.
Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox
Fig. 1 Fig. 2
In the default setting, the symbol is available in the function key line, and pressing the associated
function key or use the settings menu as shown in the table below.
Forward when Busy: Forwarding calls ringing while the phone is busy to the number of the phone,
Forward after Timeout: When a call starts ringing, the phone will wait for the number of seconds
Fig. 3 – Forwarding all calls Fig. 4 – Forwarding when busy Fig. 5 – Forwarding when call has not been
answered after time set in seconds
Settings on the phone and turning on call forwarding
Forward all Forward when busy Forward after timeout
Press
Press
2
ABC
Call Features
2
ABC
Call Features
2
ABC
Call Features
Press
1
Call Forwarding
1
Call Forwarding
1
Call Forwarding
Press
1
Forward All
2
ABC
Forward when Busy
3DEF
Forward after Timeout
Press
or
1
Enable forwarding or
1
Enable forwarding or
1
Enable forwarding
no) (Fig. 6, below) to on (yes), and the setting for the forwarding
target appears (Fig. 7). In the case of forwarding after timeout, the setting for the time span
also appears(Fig. 8).
Press
2
ABC
Target
2
ABC
Target
2
ABC
Target
Fig. 1: All calls for one of the congured identities
are forwarded to a specied target.
Fig. 2: All calls for all or more than one of the
congured identities are forwarded to a
specied target or specied targets.
Scrolling line