99
D335 User Manual Customizing the Phone Settings
3. In the Privacy Settings section select the radio button Hide or Show of the setting Suppress own
number (CLIP/CLIR).
4. Click Apply and Save.
Rejecting anonymous calls
With this setting you will not receive calls from phones whose number is not shown on your display.
Anonymous callers will hear the busy signal.
Please note that calls from analog phone connections will, most likely, be received as
Setting on the phone
1. Press > Call Features > Incoming Calls.
2. Select Reject anonymous and press to change the setting from yes to no and vice versa.
3. Press for two seconds to return to the idle
screen.
Setting on the web interface
1. Open the Preferences page and select the General tab if not already selected.
2. In the Privacy Settings section, click the radio button Reject of the Reject incoming anonymous
calls setting.
3. Click Apply and Save.
QuickLookUp (number guessing / auto completion)
When the function is enabled, the phone will propose numbers containing the typed string from the
numbers saved on its call lists and in the directory as soon as you have typed the minimum number
of digits on the "enter number" display. If there is more than match, select with / on the
navigation key and press to dial.
on, and the minimum number of characters that must be entered before QuickLookup
and select Preferences - General - QuickLookup.
In earlier versions the default setting for the number guessing (auto completion) function
is o. To be able to use the functions, open the phone's web interface to the Advanced
Settings page > Behavior tab > Phone Behavior section, change the Number guessing
setting to on, and enter the minimum number of characters that must be entered before
number guessing will start.
In the following example, the minimum number of characters is four:
To Next Page
Loading...
