61
D335 User Manual Using the Phone
Blind transfer
• Blind transfer of active call
1. With a call on the line (Fig. 9), press . The dial screen will appear.
Fig. 9 Fig. 10
2. Dial the number (Fig. 10), or press to select a number from the internal or one of the
available external phone directories (see "Calling number from phone directory" on page 51
and "Calling number from external directory" on page 51).
Note: If a call is waiting (Fig. 11), as indicated by the symbol / in the lower
right corner, you must reject it before you can transfer your active call blindly.
Fig. 11 Fig. 12
a. Press the function key underneath / . The "Call Waiting" screen (Fig. 12)
appears.
b. Press to reject the call waiting. The caller hears the busy signal.
3. Press
caller's name/number, indicating that the transfer was completed (Fig. 6 and 7 on the
preceding page).
• Blind transfer of call waiting
1. If you are in a call and want to transfer a call waiting (Fig. 13), press the function key
underneath / . The "Call Waiting" screen (Fig. 14) appears.
Note: Your active call will remain active while you are transferring the ringing call.
Fig. 13 Fig. 14
To Next Page
Loading...
