Snom D335 - Turning off Call Forwarding; Turning Forwarding of All Calls On;Off with a Function Key

68
D335 User Manual Using the Phone
Type phone number phone number phone number
Press
3DEF
Call Forwarding time
Type number of seconds
Press
for two seconds to return to the idle screen.
Fig. 6 Fig. 7 Fig. 8
Turning o call forwarding
Forward all Forward when busy Forward after timeout
Press
Press
2
ABC
Call Features
2
ABC
Call Features
2
ABC
Call Features
Press
1
Call Forwarding
1
Call Forwarding
1
Call Forwarding
Press
1
Forward All
2
ABC
Forward when Busy
3DEF
Forward after Timeout
Press
or
1
Enable forwarding or
1
Enable forwarding or
1
Enable forwarding

case of timeout, for the time span will disappear.
Press for two seconds to return to the idle screen.
Turning forwarding of all calls on/o with a function key
Turning call forwarding on

the setting is done on the phone, it applies to the identity selected as outgoing identity.
1. Press . The display will show the Target when Forwarding screen.
Note: If is not available when the display is in idle mode, you can make it available
on the Function Keys page of the phone's web interface. For further information see
chapter Conguring the function keys, "Example 4, Changing setting of context-sensitive
key" on page 82. Default settings: See "At a glance" on page 18.
2. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
3. Press .
Turning call forwarding o
Press the function key underneath .