Snom D335 - Function Key Settings on the Web Interface

75
D335 User Manual Conguring the Function Keys
Fig. 15 Fig. 16
11. Select Short Label Mode (Fig. 15) and press .
12. Specify the content you want the label to display by scrolling to the respective line (Fig. 16) and
pressing to save and return to the Key 17 Function menu (Fig. 15). The default is icon and text;
you can also select text or icon only — see "Short/Full Label Mode (phone)" on page 70 for more
information.
13. Select Full Label Mode and press .
14. Specify the content you want the label to display by scrolling to the respective line and pressing
to save and return to the Key 17 Function menu. The default is icon and text; you can also select
text or icon only — see "Short/Full Label Mode (phone)" on page 70.
15. Press Key Function menu; press for 3 seconds to return to the idle

pressing the key and to pick up calls ringing on the extension; the LED will indicate the call status
of the extension, i.e., idle, ringing, and in call. See "Example 1, Extension monitoring and call pick-
up" on page 77
Function key settings on the web interface
See "Selected examples for function key programming", below, for the function key mapping and
"Display options for SmartLabel keys" on page 83 for the optical presentation on the display.
Fig. 1