Snom D335 - Page 70

70
D335 User Manual Conguring the Function Keys
other module of the same type is connected to the phone. They are not visible on the function
keys page when no expansion module is connected.
◦ Context





menu of P2's "Context". When you speed dial the number by pressing key P2, identity 2 will be
used as the outgoing identity.
The default setting is "Active", which means that the identity selected as the phone's outgoing
identity at any given time will be used.
◦ Type
Select the type of functionality from the drop-down list. See "Appendix 4 - Programmable
Functions" on page 117 for more information. If you select "Key Event", a drop-down list with

◦ Number
Enter one phone number or value for the function or, if the function is key event, select an
event from the drop-down list. Enter phone numbers exactly the way they need to be dialed,
i.e, type the number without spaces or punctuation marks between the digits. For example, a
number with an area code that might conventionally be notated as (916) 555-1234 should be
entered as 9165551234.
◦ Short/Full Label Mode (phone)
Select a mode from the drop-down list. The default settings for both are icon and text.
- Icon. The label will display the icon of the functionality mapped onto the key, e.g.,
, if extension; , if speed dial; etc.
- Text. The label will display the text you have entered in step 10 of "Function key settings
on the phone" on page 73 or the number if no text was entered.
- Icon and text. The label will display the icon of the functionality mapped onto the key and
the text or number.
◦ Short/Full Label (phone), Label (D3 expansion module)


blank, the number will be displayed in the key label area.
◦ LP Feature (setting on phone only – functionality for long-pressing of keys)
 (keys
P1–P32). In the default setting, the function is enabled (Fig. 1).
If necessary, use the page key to select the page the key is on and press the key for three
"Function key
settings on the phone" on page 73, step 4, on how to continue.
Note: The LP Feature must be deactivated for the functions Push2Talk and Line
Info Layer.
If the LP feature of a key has been disabled, use the Preferences menu, Fkeys
and SmartKeys