Snom D335 - Quicklookup (Number Guessing; Auto Completion)

53
D335 User Manual Using the Phone
2. Press / if you wish to dial another number while waiting for call completion (Fig. 2).
You can now hang up the handset to return to the idle screen (Fig. 3); use handset, headset, or
speakerphone to dial another number; receive calls etc. Call completion will not interfere with the
normal operation of your phone.
 / .
3. When the number becomes available, you will see it announced on the display (Fig. 4) and hear a
double beep if you are in a call.
Fig. 4
4. Press / to dial, or press / 
QuickLookUp (number guessing / auto completion)
When the function is enabled, the phone proposes numbers containing the typed string from the
numbers saved on its call lists and in the directory as soon as you have typed the minimum number
of digits. If there is more than match, select with / on the navigation key and press to dial.

characters that must be entered before QuickLookup starts looking for matches is three.
"QuickLookUp (number
guessing / auto completion)" on page 99.
In the following example, the minimum number of characters is four.
Note: In earlier FW versions, the default setting for the number guessing/auto
completion function is o. To enable it, open the phone's web interface to the
Advanced Settings page, Behavior tab (available in admin mode only). In the Phone
Behavior section, change the Number guessing setting to on, and enter the minimum
number of characters that must be entered before number guessing will start.