Snom D335 - Page 89

89
D335 User Manual Customizing the Phone Settings
On the web interface

that identity will open; it contains four tabs, with the left one, Login, visible in the front. To view SIP,
NAT, and RTP pages, click the respective tab; the font weight of the tab on the active page is bold.
1. Login tab. Enter the information received from your provider or your administrator in the

◦ Display name
The display name is optional and freely selectable. It will be sent to any parties you call
unless you hide your identity (see "Hiding my caller ID" on page 98). If you do not enter a

parties you call unless you hide your identity.
◦ Display text for idle screen

on your display only. It will not be sent to any parties you call.
◦ Ringtones
The phone has 10 built-in ringtones that can be assigned to identities, group types, and contact

"Silent".
See "Assigning ringtones" on page 90.
2. SIP settings. Click the SIP tab to bring the page to the front. It contains a number of technical

example), as well as some behavior settings. These are:
◦ 
Acoustic alert (one short beep) when the phone accepts a call automatically: Preferences >

◦ Contact List. A contact list must be available on a server. Click "on" and enter the Contact List
URI .
◦ Identity can receive calls. The default setting is "on". If you want to be able to use the identity
for outgoing calls but do not wish other phones to be able to call the identity, turn the setting

◦ Allow incoming extension monitoring. If you do not want other phones to be able to monitor

You can also allow only certain phones to monitor and pick up your calls. In this case, select
On
The password cannot start with a "{" bracket.
Any phone allowed to monitor and pick up your calls must also use the same password in this

Note: If you want the activity on the monitored phones to be displayed on your
idle screen, enable the "Go to Call Monitor on Activity" on the Advanced Settings
page, Behavior tab, Phone Behavior section.
3. If you have changed the account or the registrar, click Re-Register and Save. If you have made
other changes, clicking on Apply and Save"How the web interface works" on page
36).