SolarEdge SEAUTO-TX-5000 User Manual

1. TurnOFFtheinverterON/OFFswitch,andwaituntiltheLCDindicatesthattheDCvoltageissafe
(<50V),orwaitfiveminutesbeforecontinuingtothenextstep.
WARNING!
If you cannot see the inverter panel, or if a malfunction is indicated on the LCD panel, wait five
minutes for the input capacitors of the inverter to discharge.
Si vous ne pouvez pas voir l'écran de l'onduleur ou si un dysfonctionnement est indiqué sur l'écran
LCD, attendez cinq minutes pour que les condensateurs d'entrée de l'onduleur soient déchargés.
2. TurnOFFtheConnectionUnitandtheACswitchofthedistributionpanel.
3.
OpenandremovetheConnectionUnitcover.
4. Openandremovethetransparentinternalcover.
5. RemovethebatteryfromtheupperboardoftheConnectionUnitandreplacewithanewstandard
9Vbattery.
6. ClosetheConnectionUnitcovers.
Figure 47: The battery holder
Appendix C: Replacing and Adding System Components
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
105

SolarEdge SEAUTO-TX-5000 Specifications

General

Brand	SolarEdge
Model	SEAUTO-TX-5000
Category	Inverter
Language	English