SolarEdge SEAUTO-TX-5000 User Manual

Chapter 7: Commissioning the Installation
Thischapterdescribeshowtoactivatethesystem,pairthepoweroptimizerstotheinverterandverify
theproperfunctioningofthesystem.
Removing the Inverter Cover
Iftheinvertercoverisnotalreadyremoved,usethefollowingprocedureforcoverremovalfor
communicationconnectionormaintenancepurposes.
1. TurntheinverterON/OFFswitchtoOFF.Wait5minutesforthecapacitorstodischarge.

WARNING!
If the inverter was operating properly (power was produced by the power optimizers), the following
message is displayed.
D C V O L T A G E N O T S A F E
D O N O T D I S C O N N E C T
V D C : 7 2 . 0
This message is displayed until the DC voltage is safe (50V). Do not open the cover until the voltage
is safe or until at least five minutes have passed.

La tension de sécurité par défault est de 50V.
Ne pas ouvrir le couvercle ou les connecteurs DC jusqu'à ce que la tension soit affichée comme
sécurisé ou jusqu'à ce que cinq minutes au moins se soient écoulées.
2. TurntheConnectionUnittoOFF.
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
44
Chapter 7: Commissioning the Installation

SolarEdge SEAUTO-TX-5000 Specifications

General

Brand	SolarEdge
Model	SEAUTO-TX-5000
Category	Inverter
Language	English