SolarEdge SEAUTO-TX-5000 - Installation Equipment List; Inverter Transport and Storage


Foradditionalinformation,referto
https://www.solaredge.com/sites/default/files/storedge_wiring_quick_guide_and_on_
site_checklist_na.pdf.
Installation Equipment List
StandardtoolscanbeusedduringtheinstallationoftheSolarEdgesystem.Thefollowingisa
recommendationoftheequipmentneededforinstallation:
l Allenscrewdriverfor5mmscrewtypefortheinvertercover,ConnectionUnitcover,andinverterside
screws
l Standardflat-headscrewdriversset
l Non-contactvoltagedetector
l Cordlessdrillorscrewdriverandbitssuitableforthesurfaceonwhichtheinverterwillbeinstalledand
foropeningtheConnectionUnitdrillguides.Useofanimpactdriverisnotrecommended.
l Appropriatemountinghardware(forexample:stainlessbolts,nuts,andwashers)forattaching:

o
themountingbrackettothemountingsurface

o
thepoweroptimizertotheracking(notrequiredforsmartmodules)
l Wirecutters
l Wirestrippers
l Voltmeter
Forinstallingthecommunicationoptions,youmayalsoneedthefollowing:
l ForEthernet:

o
CAT5/6twistedpairEthernetcablewithRJ45connector.

o
IfusingaCAT5/6cablespool:RJ45plugandRJ45crimper
l ForRS485:

o
Four-orsix-wireshieldedtwistedpaircable.

o
Watchmakerprecisionscrewdriverset
Inverter Transport and Storage
Transporttheinverterinitsoriginalpackaging,facingupandwithoutexposingittounnecessaryshocks.
Iftheoriginalpackageisnolongeravailable,useasimilarboxthatcanwithstandtheweightofthe
inverter(refertotheinverterweightinthespecificationdatasheetprovidedwiththeunit),hasahandle
systemandcanbeclosedfully.
Storetheinverterinadryplacewhereambienttemperaturesare-13°F-140°F/-25°C-+60°C.
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
12
Installation Equipment List