SolarEdge SEAUTO-TX-5000 - Page 109

4.
OnLGChembatteries-turnOFFtheauxiliarypowerswitchandthecircuitbreakerswitch.
Figure 49: LG Chem switches
5. UseamultimetertoverifythatDCvoltageisbelow50Vatthebatteryconnection.
6. Disconnectthecablesfromthebatterysideandreplacethebattery.
7. ConnectthebatterytothesystemasdescribedinConnectingtotheBatteryonpage34.
Appendix C: Replacing and Adding System Components
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
107