RE
NAME
This option can be used to change the name of any Title, even if it is not the one that is
currently open. Selecting Rename will produce the New Name pop-up. Type the new Title
n
ame, and click OK.
For the currently open Title (and Project), you can always edit the names, and other details,
i
n the
N
otes
a
rea in the right hand side of the AWS Remote window. Once you have finished,
press
Save (at the bottom of the window) to save your changes.
Pressing Undo will cancel any changes made and revert all entries to to their previous details.To name a Title, select the
Title which you wish to rename, and make it the Current Title. You can now edit Title name and other details in the Notes
area in the right hand side of the window. Once you have finished, press Save Notes (located below the Title area) to
save your changes.
DELETING A TITLE
To delete a title, right-click (Mac: ctrl-click) on the Title folder and select Delete from the
drop-down menu. Click OK in the Confirm Delete pop-up to delete the title.
Please be aware that this action cannot be undone.
Projects and the Remote Browser
Page 5-6 AWS δelta Owner’s Manual
AWS 948 TRANSFER COMPATABILITY
Note that when loading Titles created on an AWS 900 or 916-924 onto a 948, the automation is applied to both sides
of a stereo channel. In In-Line modes, automation is applied to the primary channel path, and the secondary channel path
drops into Manual.
Total Recall Auto Scan will not work on these titles as it will find uncorrectable mismatches between setups.