Solid State Logic AWS DELTA 916 User Manual

DIRECT NETWORK CONNECTION (PC)
To set up the connection:
• Double click on Network Connections in Start/Control Panel. Right click on the network adapter connected to your
AWS (likely to be called “Local Area Connection”). Select Properties.
• Select Internet Protocol (TCP/IP) and Properties.
• Next, configure the adapter as shown below:
• Click on OK on both windows to save. Back in your network connection list, right click on your adaptor and ensure
that it is enabled. If it is disabled, the enable option will appear in the list. Click on enable.
DAW Connection
Page 1-10 AWS δelta Owner’s Manual
Must match the
AWS IP address

Solid State Logic AWS DELTA 916 Specifications

General

Brand	Solid State Logic
Model	AWS DELTA 916
Category	Recording Equipment
Language	English