The δ-Ctrl GUI
The main function of the plugin GUI is to assign the console channel object to the plug-in. Mixing with δ-Control does not
normally require use of the GUI. It is primarily for object status display.
Automation
Page 7-6 AWS δelta Operator’s Manual
1 2 3
4
56
7
8
9
1 Console Type (Drop-down menu)
2 Console Object (Drop-down menu): Channel,
Group or Bus
3 Console Object Number (Drop-down menu).
Control Click to enable/disable the Auto
Increment feature. Object number is greyed out when
active
4 Assigned Console Object Switches – Indicates
the current switch state. Click on the switch to
toggle console state and to write automation
5 Plug-in software revision
6 Fader Levels for ABS and Trim in dB
7 Fader – Click on Fader to change level. Double
click to set to 0dB. Fader knob will change to gold
if Trim mode has been enabled
8 Fader Status – Indicates status of corresponding
LEDs on the console fader strips
9 Channel label – as displayed on the console
scribble strips
To Next Page
Loading...
