Solidscape 3Z Series - Appendix A - Preventive Maintenance Schedule

Preventive Maintenance
61
Appendix A - Preventive Maintenance Schedule
Every As
Component Job Required Weekly Monthly Yearly
Material Reservoir Levels Check Add Mat'l Verify Calibrate
Paper Tape Roll Check Replace
Print Head Purge Cup Check Replace
Build Plate Check Replace
Vacuum Bag Replace Replace
Camera Lens Clean Clean
Paper Tape Drive Area Clean Clean
Entire Unit Clean
Belts Inspect Replace
Rails Clean
Cutter Blade Inspect Clean
Cutter Vacuum Hose Inspect
Heated Lines Inspect Replace
Temperatures Inspect Calibrate
Reservoir Material Filters Replace
Reservoir Air Tubing Replace
Reservoir Level Detect Inspect Calibrate
MDS system Clean Calibrate
Fuse Replace