Technical Specifications
63
Appendix B - Technical Specifications
3Z Works Requirements
Configuration Microsoft Windows XP or Vista or Windows7
Processor 2 GHz
RAM 256 Mb
Hard disk space 500 Mb available
CAD file input *.STL and *.SLC
3Z
®
Model Build Material
Composition Thermoplastic
Melting point 203º F (95º C) to 230º F (110º C)
Density 1.25 g/ml
Melting Shrinkage 65% (solid to liquid)
No residue after autoclave process
No shrinkage, distortion, disintegration
No toxins
3Z
®
Support Material
Composition Natural and synthetic waxes and fatty esters
Melting point 120º F (49º C) to 158º F (70º C)
Density 0.93g/ml @ room temperature
0.81 g/ml @ 110º C
Melting Shrinkage 67% (solid to liquid)
Soluble in a BIOACT VSO solvent at 131º F (55º C)
No post dissolve dry or cure time
No post dissolve finishing or touch up
No toxins
To Next Page
Loading...