3-9
BVW-55
A3 : BETACAM PB ADJUST
This submode is used to adjust the video PB system.
For more details, refer to the maintenance manual part 2 volume 1.
A4 : MECHANISM ADJUST
This submode is used to adjust the mechanism part.
For more details, refer to the maintenance manual part 2 volume 1.
3-2. TAPE Maintenance Mode (M0)
3-2-1. Overviews
BETACAM PB ADJUST MODE
A32:DM VR 1
A33:DM VR 2
A34:DM VR 3
A35:DM VR 4
A36:DM VR 5
A37:TBC VR 1
A38:TBC VR 2
A3F:NV-RAM CONTROL
*
MECHANISM ADJUST
A40:PATH MODE SEL
*
To Next Page