Sony MAP-S1 Service Manual

MAP-S1
35
2-3. Panel Test
It can confi rm the fl uorescent indicator tube, LEDs, model name,
destination, software version and buttons.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the buttons on the remote commander in order of the
[ALPHABET SEARCH] → [1] → [9] → [ENTER].
(Press the next button within three seconds)
3. It enters the panel test mode, and all segments on the fl uores-
cent indicator tube and all LEDs light up.
Screen display
1
NX
REC FLDR SHUF PGM TUNED STEREO c PLAY c REC
UPDATESLEEP
4. When the [– TUNING +
. >
] dial turned clockwise, the
model name and destination are displayed on the fl uorescent
indicator tube alternately.
(In this mode, “ ”continues lighting up and “STEREO” con-
tinues blinking on the liquid crystal display)
Screen display
MAP-S1 B
STEREO
CE2
STEREO
Blinking
Destination
Model name
display
Destination
display
Canadian MAP-S1 NA
AEP, UK, Hong
Kong and Malaysia
MAP-S1 B CE2
Australian MAP-S1 B AU
5. When the [– TUNING +
. >
] dial turned clockwise
again, the MC version is displayed on the fl uorescent indicator
tube.
6. Each time [– TUNING +
. >
] dial turned clockwise, the
display changes MCS version → PF version → MTK version
→ OPU version → NWM version → BTM version → GC
version → USBL version → NWA version → NWD version
→ BTA version → CD version → CDMA version → CDMB
version → ST version → TA version → TM version this order,
and returns to the MC version display.
Note: OPU version is not displayed normally on the fl uorescent indicator
tube.
MC 1.00
STEREO
MC version
MCS version
PF version
MTK version
OPU version
(Version is not displayed)
NWM version
BTM version
GC version
USBL version
NWA version
NWD version
BTA version
CD version
CDMA version
CDMB version
ST version
TA version
TM version
MCS 1.00
STEREO
PF 21.08
STEREO
MTK 1.020
STEREO
OPU
STEREO
NWM 1.01
STEREO
BTM 40.00
STEREO
GC 0.01
STEREO
USBL 0.00
STEREO
NWA 3.30
STEREO
NWD 1.18
STEREO
BTA 0.81
STEREO
CD 0.12
STEREO
CDMA 1.43
STEREO
CDMB 0.10
STEREO
ST 1.39
STEREO
TA 0.40
STEREO
TM 0.01
STEREO
(Displayed values in the above fi gure are example)
– Continued on next page –

Sony MAP-S1 Specifications

General

Receiver type	stereo
Audio output channels	2.0 channels
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	0
Audio (L/R) in	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Binding post
Ethernet LAN	Yes
Supported radio bands	AM, FM
Optical drive type	CD player
Card reader integrated	No
Display	-
Product color	Silver
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.4 W
Power consumption (typical)	55 W