96
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO (digital video disc, video) being played.
, You are trying to change the angles when “ ”
does not appear on the TV screen (page 57).
, The DVD VIDEO (digital video disc, video)
prohibits changing angles.
, Try changing the angle using the DVD VIDEO
(digital video disc, video)’s menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 (audio layer 3 of moving picture
experts group) audio tracks do not play.
, The MP3 (audio layer 3 of moving picture
experts group) audio tracks are not recorded in a
format that the recorder can play (page 63).
The JPEG (joint photographic coding experts
group) image files do not play.
, The JPEG (joint photographic coding experts
group) image files are not recorded in a format
that the recorder can play (page 63).
, Progressive JPEG (joint photographic coding
experts group) images cannot be played.
The channel cannot be changed from the
channel you are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after you
press z REC (recording).
, Operate the recorder only after “LOAD” (load),
“FORMAT” (format), or “INFOWRITE”
(information writing) disappears from the front
panel display.
Nothing was recorded even though you set the
timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure that lasted for more than 1 hour.
Reset the clock (page 83).
, The channel was disabled after the timer
recording was set. See “Tuner Preset” on
page 82.
, Disconnect the AC power cord from an AC
outlet, and connect it again.
, The program contains copy protection signals
that restrict copying.
, The timer setting overlapped another setting that
was set later or has priority (page 51).
, There is no DVD (digital video disc) inside the
recorder.
, There is not enough disc space for the recording.
, The recorder was in the process of DV (digital
video)/Digital8 Dubbing.
Recording does not stop immediately after you
press x REC STOP (recording stop).
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Recording does not stop after you press x
STOP (stop).
, Open the remote’s cover and press x REC
STOP (recording stop).
Timer recording is not complete or did not start
from the beginning.
, There was a power failure during recording. If
the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more than
1 hour, reset the clock (page 83).
, The timer setting overlapped another setting that
was set later or has priority (page 51).
, Disc space was not enough.
Contents previously recorded were erased.
, Data that has been recorded on a DVD (digital
video disc) with a PC (personal computer) will
be erased from the disc when the disc is inserted.
Recording/Timer recording/
Editing
To Next Page
Loading...
