Sony STR-DA2800ES - Page 142

STR-DA2800ES
142
Pin No. Pin Name I/O Description
65 DVCC - Power supply terminal (+3.3V)
66 DVSS - Ground terminal
67
NET_PCON_
MTK_CORE
O
Power supply on/off control signal output terminal for the network section +1.1V power supply
“H”: power on
68, 69
NET_PCON1,
NET_PCON2
O
Power supply on/off control signal output terminal for the network section power supply
“H”: power on
70
NET_MII_
CONT/PWSAVE
O Power supply on/off control signal output terminal Not used
71 NET_PCONT_HUB O
Power supply on/off control signal output terminal for the ethernet section power supply
“H”: power on
72 to 76 - - Not used
77, 78 P00, P01 I Not used
79 - - Not used
80 POWER_SW I Power switch input terminal
81 CEC_SUB/DV O CEC serial data output to the HDMI connector
82 CEC_V/SUB I CEC serial data input from the HDMI connector
83 ZONE_SEL I Key input terminal Not used
84 TUN+/–2 I Jog dial pulse input terminal from the rotary encoder Not used
85 TUN+/–1 I Jog dial pulse input terminal from the rotary encoder Not used
86 TONE+/–2 I Jog dial pulse input terminal from the rotary encoder Not used
87 TONE+/–1 I Jog dial pulse input terminal from the rotary encoder Not used
88 - - Not used
89 HP_IN I Headphone plug insert detection signal input terminal “H”: headphone plug is inserted
90 VCC_3.3V - Power supply terminal (+3.3V)
91 VSS_GND - Ground terminal
92 X1 (X_OUT) O Main system clock output terminal (4 MHz)
93 X0 (X_IN) I Main system clock input terminal (4 MHz)
94 LED_POWER O LED drive signal output terminal for power on indicator “H”: LED on
95 LED_STB O LED drive signal output terminal for power standby indicator “H”: LED on
96 MIC_ON/OFF O Microphone muting on/off control signal output terminal “H”: muting on
97 to 99 - - Not used
100 FL_CLR O Clear signal output to the fl uorescent indicator tube