Sony STR-DA2800ES - Page 41

STR-DA2800ES
41
Items Display Remark
EERROM debug mode EEPROM Not used for the servicing.
EERROM check EEPROM CHK Not used for the servicing.
GUI boot check GUI CHECK Not used for the servicing.
World switching C4 GUI Not used for the servicing.
Watch dog on/off setting WATCH DOG Not used for the servicing.
DAC reset function DAC RESET Not used for the servicing.
Sleep time shortening on/off
setting
SLEEP DBUG Not used for the servicing.
Auto standby A.STBY DBUG
When [,] button on the remote commander is pressed, the
message “ON” or “OFF” is appears.
Auto standby function on/off switched (setting value is 2 min-
utes)
Auto standby signal level S XXXXXXXX XXXXXXXX: Current signal level
Auto standby signal min L XXXXXXXX
XXXXXXXX: Minimum signal level
Each time [MEMORY/ENTER] button is pressed, value is
reset.
Auto standby signal max U XXXXXXXX
XXXXXXXX: Maximum signal level
Each time [MEMORY/ENTER] button is pressed, value is
reset.
Protector on/off setting PROTECTR Not used for the servicing.
Audio swap mode SWAP MODE Not used for the servicing.
Volume value display (FL/FR)
LRXXXX
Not used for the servicing.
Volume value display (SL/SR)
SSXXXX
Not used for the servicing.
Volume value display (CT/SW)
CSXXXX
Not used for the servicing.
Volume value display (SBL/SBR)
BBXXXX
Not used for the servicing.
DAC mute fl ag upper U XXXXXXXX Not used for the servicing.
DAC mute fl ag lower L XXXXXXXX Not used for the servicing.
2nd volume value display VOL2 Not used for the servicing.
Dark out duty DUTY Not used for the servicing.
Pass through auto debug PTAD Not used for the servicing.
Temperature detection value
display
THERMAL Not used for the servicing.
Limiter detection value display LIMITER Not used for the servicing.
Transformer tap switch setting POWER CTRL Not used for the servicing.
Temperature detection threshold
value setting
TRIG LEVEL Not used for the servicing.