Sony XVS-G1

371
When [Edge Crop] is selected, press the [Position] button
and set the following parameter.
When [Letter Box] is selecte
d, press the [Position] button
and set the following parameter.
To return the conversion method settings to the
defaults
Press the [Default] button.
Setting a Color Corrector
You can set the following color corrector functions for
inputs that have color corrector/HDR converter enabled.
• Primary color correction
•RGB clip
For details about inputs that can be configured with a
color corre
ctor/HDR converter, see “Selecting Inputs
Configurable with a Color Corrector/HDR Converter”
(page 369).
When the system signal format is 1080P, 1080i, or 720P,
a c
olor corrector cannot be used.
1 Open the Home > Setup > System > Input > Input
CCR menu (19101.34).
2 Select the target input to set.
3 Set the [CCR] button in the [CCR] group to the on
state.
To disable a color corrector, set
the [CCR] button to
the off state.
To return color corrector settings to the defaults
Press the [Unity] button in t
he [CCR] group, check the
message, then press [OK].
To set primary color correction
Set the [Primary CCR] button in the
[Primary CCR]
group to the on state and set the parameters.
For details about setting primary
color correction, see
“Setting primary color correction” (page 243).
To set the RGB clip function
Set the [RGB Clip] button in the [RGB Clip] group to the
on sta
te and set the parameters.
For details about setting the RGB c
lip function, see
“Setting RGB clip” (page 244).
Setting an HDR Converter
You can set the input signal OETF, color space, and HDR
converter for inputs that have color corrector/HDR
converter enabled.
For details about each HDR
conversion item, see
“Setting HDR” (page 367).
For details about inputs that can be configured with a
color correct
or/HDR converter, see “Selecting Inputs
Configurable with a Color Corrector/HDR Converter”
(page 369).
• To use the HDR converter function, the XZS-G1750
HDR C
onverter License (option) is required.
• When the system signal format is 1080P, 1080i, or
720P, an HDR converte
r cannot be used.
1 Open the Home > Setup > System > Input > HDR
Converter menu (19101.35).
The system OETF, color space
, and HDR settings are
displayed in [System Settings].
2 Select the target input to set.
To select and set multiple inputs, place a check mark
besi
de the target inputs to set.
To select and set all inputs, plac
e a check mark in the
Select All checkbox.
3 Press the [Input Signal OETF] button and select an
OETF from the pull-down list.
Select [SDR], [HLG], [PQ], [S-Log3 (HDR)], or [S-
Log3 (Live
HDR)].
4 Press the [Color] button and select a color space from
the pull-down list.
Select [BT.709] or [BT.2020].
5 Enable/disable the system settings using the [Follow
System Settings] switch.
On:
Enable system settings. Apply the system
settings to the input signal.
Off: Di
sable system settings. Apply different settings
than the system settings to the input signal.
If the system settings are disabled, press the
[Adjust
Details] button and configure the HDR conversion
settings in the [HDR Converter] window.
No. Parameter Adjustment
1 EC Position Image position
No. Parameter Adjustment
1 LB Position Image position
Note
Notes