Important safety instructions
Operating Instructions Soyer Bolzenschweißtechnik 11
Safety instruc-
tions on the device
As an additional warning of danger, warning labels can be found on the devices.
Warning labels are affixed by the manufacturer and must not be removed. If a
warning label is damaged and thus illegible, a new warning label must be affixed
immediately.
Warning labels must be obtained from the manufacturer.
2.2 General safety instructions
Danger from electric current, general information
When working on live components, there is a danger to life from electric
current.
• Work on electric or electronic components may only be performed by
trained electrotechnical personnel in accordance with currently applicable
electrotechnical regulations.
• Protection devices must not be manipulated or disabled. Protection
devices include, for example, housing and housing cover, fuses or power
switches.
• If protection devices have to be removed for maintenance work, the device
may only be switched on again when all protection devices are installed
and their functionality has been checked.
• Starting the device with faulty protection devices is not permitted. Faulty
protective devices must be repaired or replaced immediately. Unintentional
operation by third parties must be prevented.
To Next Page
Loading...
