Settings
64 Operating Instructions Soyer Bolzenschweißtechnik
13. Settings
The stud welding device and the stud welding gun must be matched and adjusted
for the respective work.
13.1 Adjusting the welding parameters
In the following, it is described how the welding parameters
• Welding current
• Welding time
• SRM® current
• Gas pre-flow time and
• Lift time/height of lift
are adjusted.
In order to achieve an optimal stud welding result, carrying out some test welds
with different settings is necessary.
The parameters to be set on the stud welding device depend, among others, on
the following influencing factors:
• Material of the workpiece
• Thickness of the workpiece
• Material of the welding stud
• Diameter of the welding stud
To Next Page
Loading...
