Description of the BMK-8i ACCU stud welding device
Operating Instructions Soyer Bolzenschweißtechnik 35
7.6 Cleaning the stud welding device
Do not use aggressive detergents for cleaning the device.
Please make sure that any cleaning waste is disposed of in an environmentally
safe manner. Please observe the instructions of the detergent manufacturer.
The frequency of cleaning depends on the operating conditions of the stud weld-
ing device.
Dangers during cleaning
Improper cleaning of the stud welding device can endanger personnel.
• The device may only be cleaned by trained specialists.
• Before any cleaning work is done, the stud welding device must be discon-
nected from the main power supply and secured against accidental switch-
on.
• Work on electrical devices and components may only be performed by
skilled electricians in accordance with electrotechnical regulations.
• Make sure that no liquids get into the device.
Damage to the device due to incorrect cleaning
Incorrect cleaning may cause damage to the device.
• Make sure that no liquids get into the device.
• Do not use aggressive detergents for cleaning the device.
To Next Page
Loading...
