Description of the BMK-8i ACCU stud welding device
30 Operating Instructions Soyer Bolzenschweißtechnik
7.3.2 Battery charging and status indicators
Figure 4: Battery charging and status indicators
Item Designation
a LED lights up red: The battery is being charged.
LED lights up green: The battery is charged.
b Charging status indicator on the display:
The charging status is displayed by pressing the release button of the
welding gun.
If the device is not operated for ten (10) seconds, it switches to the
standby mode. If any button is pressed afterwards, “bAt” is shown
on the display and immediately thereafter the current charging status
in [%].
To Next Page
Loading...
