Welding operation
Operating Instructions Soyer Bolzenschweißtechnik 75
14.3 Switching off the device
Switch off the stud welding device at the mains switch.
The connected welding gun is switched off automatically.
Ensure that the stud welding device cannot be switched on and used by
unauthorised persons.
Close the valves at the gas supply.
Poor welding joint, e.g. due to a blow effect
or a welding gun that was shaken or applied
at a slant.
The stud flange is not welded completely
and has visible imperfections. Undercuts
are visible.
Visual inspection
Welding image Note
To Next Page
Loading...
