Important safety instructions
14 Operating Instructions Soyer Bolzenschweißtechnik
2.3 Safety instructions regarding the working method
Hazards due to wrong working method
Not working according to the proper working method may lead to hazards for
the operating personnel and third parties.
• Ensure that the installation location for the stud welding device is ade-
quately stable and dry.
• Make sure that you do not upset the stud welding device or pull it down
from its position with the gun’s cables/lines.
• During mobile use in particular, make sure that you are standing in a stable
position during the welding process.
• Do not hold the workpiece to be welded in your hands during the welding
process. The workpiece must be securely fastened during the welding pro-
cess.
• Never wrap the gun’s cables/lines around any part of your body (e.g. arm),
as electric fields might be generated.
• Incorrect positioning or misadjustments of the gun may cause flashes of
light to be generated during the welding process. Do not look directly into
the flash of light.
• The gun carries out lifting movements during the welding process. Do not
hold the gun in the area of moving parts.
To Next Page
Loading...
