Soyer PH-9 SRM12 - Page 4

4 Operating Instructions Soyer Bolzenschweißtechnik
CONTENTS
7.3.2 Battery charging and status indicators 30
7.4. Technical data of the BMK-8i ACCU stud welding device 31
7.4.1 Maximum settings 33
7.5. Permitted stud welding guns 34
7.6. Cleaning the stud welding device 35
8. Description of the SRM® stud chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8.1. Adjusting SRM® stud chucks 36
9. Description of the PH-9 SRM
12
stud welding gun . . . . . . . . . . . . . . . . . . . . . . 38
9.1. Technical data of the PH-9 SRM
12
stud welding gun 39
9.2. Installing the SRM® stud chuck in PH-9 SRM
12
40
9.3. Replacing the SRM
12
support tube insert of PH-9 SRM
12
42
9.4. Cleaning of the stud welding gun 43
10. Description of the PH-9 SRM
12
+G stud welding gun . . . . . . . . . . . . . . . . . . 44
10.1. Technical data of the PH-9 SRM
12
+G stud welding gun 45
10.2. Operation of the PH-9 SRM
12
+G 46
10.2.1 Safety check 46
10.2.2 Welding with the PH-9 SRM
12
+G 47
10.3. Installing the SRM® stud chuck in PH-9 SRM
12
+G 47
10.4. Replacing the SRM
12
support tube insert of PH-9 SRM
12
+G 50
10.5. Cleaning of the stud welding gun 52
11. Description of the PH-3N SRM stud welding gun . . . . . . . . . . . . . . . . . . . . . 53
11.1. Technical data of the PH-3N SRM stud welding gun 54
11.2. Installing the SRM® stud chuck in PH-3N SRM 55
11.3. Cleaning of the stud welding gun 57
12. Setup and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
12.1. Requirements for the installation location 58
12.2. Connection of the stud welding device and the stud welding guns 59
12.2.1 Mains connection 59
12.2.2 Connecting the earth cable 59
12.2.3 Connecting the stud welding gun 60
12.2.4 Connecting the shielding gas supply 60