EasyManua.ls Logo

Spacelabs qube 91390 - Electrical Specifications; Classification

Spacelabs qube 91390
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.spacelabshealthcare.com
1-5
91390 QUBE
I NTRODUCTION
Electrical Specifications
Classification
Class I - Requires outlet with Protective Earth (safety ground)
conductor
Mains Power: 100 - 240 VAC, 50 - 60 Hz, 3 - 1.5 A
Rated for continuous operation
Isolation: Leakage currents meet ANSI/AAMI ES 60601-1, CSA
C22.2 No. 60601-1, and IEC 60601-1.
Batteries: (For configuration options, refer to Qube
Configuration Options on page 1-4).
1 10.8 Volt (7.2-Ah Li-ion) smart battery. One battery
provides approximately 4 hours of operation. Two
batteries allow up to approximately 8 hours of operation.
There are approximately 300 charge/discharge cycles of
operation for each battery.
2 10.8 Volt (4.8-Ah Li-ion) smart battery. One battery
provides approximately 2 hours of operation. Two
batteries allow up to approximately 4 hours of operation.
There are approximately 300 charge/discharge cycles of
operation for each battery.
3 10.8 Volt (4.8-Ah Li-ion) smart battery. One battery
provides approximately 2 hours of operation. There are
approximately 300 charge/discharge cycles of operation
for each battery.
Note:
One battery charges in approximately two hours. Two batteries
charge in approximately four hours.
Warning:
Use designated power supply only.
Do not modify this equipment without the authorization of the
manufacturer.
To avoid electric shock, connect this equipment only to a supply mains
with a protective earth conductor.

Table of Contents

Related product manuals