www.spacelabshealthcare.com
5-8
91390
QUBE
TROUBLESHOOTING
Diagnostic Menus
Main Diagnostic Menu
To show the Main Diagnostic menu (Main Diagnostic Menu), touch
the D key in the Boot menu.
Figure 5-6 Main Diagnostic Menu
The following functions are available in the Main Diagnostic menu:
r — Returns to the Boot menu.
a — Runs the same tests that run during power-ON diagnostics.
i — The Individual Diagnostic menu shows (Individual Diagnostic
Menu).
l — Toggles Loop mode ON or OFF. When Loop mode is ON,
selected test or tests are run continuously, until power is toggled
OFF.
h — Toggles Halt On Error mode ON or OFF. The system stops
on the test that failed, and displays the results on the screen.
s — Shows system information, including power supply and
battery status details, address spaces and variables used in the
system.
R — Causes a cold boot reset just like toggling the power OFF.
To Next Page
Loading...
