www.spacelabshealthcare.com
4-17
91390 QUBE
M AINTENANCE
Complete Main Chassis Removal
1 Remove the bezel by performing Step 1 on page 4-8 though Step
8 on page 4-10.
2 To remove the two antenna cables from the wireless card, if
present, use the 003-0286-00 Antenna extraction tool as shown
in Figure 4-11.
3 For option A, remove the four chassis screws, and the two hidden
screws seen in Figure 4-11 on page 4-17. For options B and C,
remove the two chassis screws and the one hidden screw.
Note:
When you work on chassis components, first remove the CPU
PCBA.
Figure 4-11 Complete Main Chassis Removal
4 Place the monitor on its rear panel. Remove the five screws on the
bottom of the monitor, as shown in Figure 4-11.
5 Place the monitor upright.
6 Remove the connector PCB standoffs. Refer to Figure 4-12 on
page 4-18.
To Next Page
Loading...
