www.spacelabshealthcare.com
4-22
91390
QUBE
M AINTENANCE
Battery Door for Option A
1 Open the battery door.
Figure 4-16 Battery Door
2 Remove E-clip. Refer to Figure 4-16.
3 Slide the rod down through the door and rear enclosure. Refer to
Figure 4-16.
4 Remove the old door assembly.
5 Install the new door assembly.
6 Make sure that the spring is positioned correctly. Refer to
Figure 4-17.
Figure 4-17 Battery Door Spring
7 Slide the rod through the rear enclosure and door.
8 Attach E-clip.
To Next Page
Loading...
