www.spacelabshealthcare.com
4-27
91390 QUBE
M AINTENANCE
3 Attach the bezel assembly again.
Figure 4-23 Installed Handle
4 Perform the retest procedure. Refer to Functional Tests on
page 4-5.
Fan
1 Separate the bezel from the rear enclosure. Refer to Remove the
Bezel Assembly on page 4-8.
2 Perform Step 2 on page 4-26 and Step 3 on page 4-26.
3 Disconnect the fan cable from the CPU board.
4 Remove the three screws that secure the fan to the chassis. Refer
to Figure 4-24.
Figure 4-24 Fan
To Next Page
Loading...
