www.spacelabshealthcare.com
2-8
91390
QUBE
S ETUP
USB Connectors (4 for option A,
2 for options B and C)
There are two dual USB type-A connectors which allow connection
of up to 4 USB devices. The type of USB devices supported are
limited to keyboards, mice, barcode readers, and USB flash drives.
Ports are compatible with USB 2.0. The pinouts for these connectors
are as follows:
10/100BASE-T Ethernet
Connector - RJ 45
The 10/100 Base-T Ethernet connector is on the back of the unit. The
Ethernet interface is designed to conform to the IEEE802.3
standard. The monitor is designed to auto-detect and switch
between 10 Base-T and 100 Base-Tx. Pinouts for this connector are
as follows:
Table 2-7 Pinout USB Connectors
Pin # Function Image
Port A Top PIN A1 A: VBUS (+5V)
PIN A2 A: DATA-
PIN A3 A: DATA+
PIN A4 A: RTN
Port B Bottom PIN B1 B: VBUS (+5V)
PIN B2 B: DATA-
PIN B3 B: DATA+
PIN B4 B: RTN
Table 2-8 Pinout 10/100 Base-T Ethernet Connector
Pin # Function Image
PIN 1 TD +
PIN 2 TD -
PIN 3 RD+
PIN 4 TCT (+3.3 VDC)
PIN 5 RCT
PIN 6 RD-
PIN 7 N/C
PIN 8 CHS
To Next Page
Loading...
