SSD 605C - Backing-Up Your Application

The Operator Station 5-15
605C Frequency Inverter
Note: Both methods will transfer the password of the host unit. Refer to “Password Protection” ,
page 5-12.
The Operator Station still has the application data stored allowing transfer to successive units.
This information is replaced by any subsequent SAVE TO OP operation.
Backing-up Your Application
The Operator Station can be used to back-up the application data stored in the Inverter as a
safety measure. Refer to “Transferring Your Application to Another Inverter” above.
You can have the Operator Station back-up the application each time a SAVE TO MEMORY is
performed by enabling the AUTO BACKUP parameter. Refer to Chapter 6: “Programming
Your Application” - OP STATION.