Stihl TS 500i - Ribbed Poly V-Belt

35TS 500i
4.5 Ribbed poly V-belt
: Unscrew collar nuts (arrows).
: Relax the ribbed poly V-belt by
turning the hexagon (1) on the
tensioner counterclockwise until
the arrow points to "0" (arrow).
: Pull the hose (1) out of the guides
(arrows).
370RA010 TG370RA011 TG
1
370RA044 TG
1
: Remove the screw (arrow)
: Remove the belt guard (1).
: Take out the collar nuts (arrows).
: Remove starter (1)
: Take the ribbed poly V-belt (1) off
the front belt pulley (arrow)
370RA014 TG
1
1307RA009 TG
1
370RA048 TG
1
: Take the ribbed poly V-belt (1) off
the belt pulley on the clutch side
– Check the ribbed poly V-belt,
replace if necessary
: Insert ribbed poly V-belt (1) first
onto rear belt pulley (clutch)
: Then fit the ribbed poly V-belt (1)
over the front belt pulley (2) and
turn the pulley (2) to draw the belt
onto the pulley.
370RA049 TG
1
370RA049 TG
1
2