Stihl TS 500i - Once the engine is running

39TS 500i
5.2 Clutch
– Troubleshooting, b 3.1
– Remove starter cup, b 5.1
– Block the piston, b 5.1
: Unscrew the clutch (1) with
hexagon (arrow)
– Left-hand thread
: Use hook (2) 5910 890 2800 to
remove the clutch springs (1)
370RA065 TG
1
370RA066 TG
2
1
– Pull the clutch shoes off the
carrier
: Pull the retainers (1) off the clutch
shoes
– Clean the individual parts, b 13
– replace any damaged parts
– Always replace clutch shoes in
sets
: Slip the retainers (1) onto the
clutch shoes
370RA067 TG
1
370RA068 TG370RA069 TG
1
: Slide the clutch shoes (2) over
the legs (1)
: Clamp the clutch in a vise (arrow)
Hook the springs into the opposite
side of the raised hexagon.
: Attach one end of the clutch
spring (1) to the clutch shoes
: Use the hook (2) 5910 890 2800
to attach the other end of the
spring and press it firmly into the
clutch shoe
370RA070 TG
1
2
1307RA367 TG370RA072 TG
1
2